Jig Generator

v1.6
PrintereufyMake E1
What’s new How it works Support on Ko-fi

Objects up to 8

Each object gets its own orientation, pocket shape and quantity. The Orientation preview shows the object you last touched; drag it to inspect.

Bed

mm
mm
WHAM BAM ULTIM8™ JIG BetaEvery part gets its own printed fixture with Ø5 mm pegs that press into the holes of the XL MAT. Style, wall and pegs are under Output.
See the jig
Jig Alignment FrameClips onto the Mini bed so every jig lands in the same spot, print after print.
Get it free
Jig Alignment FrameClips onto the Standard bed so every jig lands in the same spot, print after print.
Get it free
Large bed jig clipsFour corner clips hold a full-bed jig on the Large bed, so it lands in the same spot, print after print.
Get it free

With Tight footprint the plate is shortened to your parts; the template stays bed-sized with the pockets placed to match.

Layout

X mm
Y mm
X mm
Y mm
mm
%

ULTIM8 fixtures pegged into the mat

mm

Corners only: the part stands on the mat and loose pieces hold its corners, each with 2 pegs of its own, 3 or 4 on parts longer than 120 or 220 mm. Corner length is how far a piece reaches from the corner: at least 21 mm (27 mm with 4 pegs), so its pegs fit beside the part and a fixture can go right to the top and bottom of the mat. On small parts neighbouring corners join into one piece. Pieces are at least 1.5 mm tall, so thin parts sit no more than 2 mm below them. Balls and form fits keep the whole fixture.

mm
mm
mm
mm

The rim sits Rim below part top under the surface you print on, so the part stays the highest point for the printer's height check (keep parts no more than 2 mm below the highest fixture). Floor 0 makes an open frame: the part stands on the mat and each peg gets a small ear beside it.

mm

Beta. Pegs follow WHAM BAM's Fixture Design Guides: Ø5 mm and 4 mm long, the depth of the mat's holes, with a 1 mm chamfer at the tip. If your printer prints pegs too fat to press in, print the Peg fit test and pick the size that presses in firmly by hand. Each fixture's pegs are placed on the fixture itself, so it fits anywhere on the mat; the layout shows one way to fill it. Fixtures download turned over (rim on the print bed, pegs up), so they print without supports; a floor prints as a bridge.

Made to fit the WHAM BAM ULTIM8™ JIG; Jig Generator is not made by or affiliated with Wham Bam Systems.

3D-printed jig

mm
mm

Plate with recessed pockets; total height = base + pocket depth. Set base thickness = 0 for through-holes (no floor); the part then rests on the printer bed. Balls use their own Cup depth (Setup tab) and make the plate as deep as the deepest cup; flat pockets keep the depth set here.

Shrinkage. 3D prints come out 0.2–0.6 % smaller than the STL, and the pockets shrink with the plate. Measure your first jig and scale the whole model up in your slicer to match (334 mm printed as 333 → 100.3 %); the same factor then applies to every jig from that printer and material.

Smaller 3D printer split the jig

mm
mm

Each seam runs between the pockets, never through one, so every pocket prints whole. Large-bed jigs are cut into a grid of tiles: seams across the jig cut it into rows, and each row is cut into pieces; Seam offset across moves the seams across up or down. Dovetails and puzzle knobs slide together from above; bowtie keys are printed separately and pressed into a socket on each side of the seam (add a drop of glue for a permanent joint). The assembled jig matches the template exactly. Print all pieces in the same material and layer height, and loosen the fit if the connectors bind.

Laser jig cut sheet

mm
mm

Build: solid base sheet + this pocket sheet, bonded. Pocket depth = stack of 1× 3mm.

Studio template

dpi
X mm
Y mm

Offset calibrates the template for your machine, bed sticker and frame. Print it once onto masking tape laid over the jig, measure how far the printed outlines sit from the pockets, and enter the correction (prints 1 mm too far right → X = −1). Shifts only the template and contour files, never the jig. Remembered per machine in this browser.

Saved jobs

Saves every setting and the loaded STL(s) in this browser's own storage (nothing is uploaded), so you can reload a whole job any time; identical STLs are stored once. Export to a .json file for backup or to move jobs between computers.

Preview

Scroll to zoom, drag empty space to pan. In Template view, drag a piece to reposition it; arrow keys nudge the selected piece (Shift = 5 mm).
cut score / registration bed edge

Orientation

Summary

Load an STL to begin.

Download files

Load an STL to enable downloads
Studio template
3D printing

Sized for the Large bed jig clips, free on MakerWorld.

Sized for the Jig Alignment Frame, free on MakerWorld.

Sized for the Jig Alignment Frame, free on MakerWorld.

Laser cutting

Jig Generator is free and made by one person. If it helps you, a tip keeps it going: Support on Ko-fi · Suggest a feature

Jigs and templates for the eufyMake E1

Made for the E1 first: pick the Mini (333 × 88 mm) or Large (333 × 418 mm) flatbed, drop the STL of the part you print on, set the quantity, and download a 3D-printable jig with pockets shaped like your part plus a bed-sized template and contour file for eufyMake Studio, so your artwork lands exactly on every piece.

For repeatable alignment on the Mini flatbed there is a printable Jig Alignment Frame; the Mini bed jig is sized for it by default (untick “Fit the jig to the Alignment Frame” for a plain bed-sized plate).

Frequently asked questions

Pick the Mini or Large flatbed, drop the STL of the part you print on (or pick a ball preset), set the quantity and download. You get a 3D-printable jig with a pocket for every piece, laser-cut sheets if you prefer acrylic, and a bed-sized template for eufyMake Studio.

Use Template · SVG: it is exactly the size of the flatbed, so each outline shows where one piece sits. Contours · SVG contains only the part shapes, for Studio’s auto-detect. Both are exported at true size, without the pocket clearance.

With the golf ball preset and 3 mm spacing, 13 golf balls fit on the Mini flatbed and 68 on the Large flatbed. No STL is needed: each ball sits in a cup that holds it steady, and the ball tops stand about 45 mm above the bed.

Yes, without an STL: under the drop zone, pick a poker chip (Ø 39 or 40 mm), a challenge coin, a US quarter, half dollar or Silver Eagle, a euro coin, a round coaster or a custom disc of any size. Each sits in a round recess 0.1 mm shallower than it is thick, so it stays the highest point for the printer’s height measurement, with a thumb notch to lift it out. 15 poker chips (Ø 39 mm) or 36 quarters fit on the Mini flatbed, and 77 chips or 204 quarters on the Large flatbed.

No, but it makes placement repeatable on the Mini flatbed: the jig always lands in the same spot, print after print. The frame is free to download on MakerWorld, and Mini bed jigs are sized for it by default.

Print the template once onto masking tape laid over the jig, measure how far the outlines sit from the pockets, and enter the correction under Output → Studio template → Offset. It is remembered for your machine. If the jig itself prints a little small, scale the whole STL up in your slicer to match (for example 100.3 %).

PLA or PETG both work well. Keep the default 2 mm base and 3 mm pocket depth for most flat parts, and measure your first jig: 3D prints usually come out 0.2–0.6 % smaller than the model.

Yes. Under Output → Smaller 3D printer, tick the split option and pick your printer bed. The 334 × 90 mm Mini bed jig is cut into two pieces of about 170 mm that join with dovetails, and a Large bed jig into a grid of tiles (usually 4 pieces for a 256 mm bed, 6 to 9 for the A1 mini). The seams run between the pockets, so every pocket prints whole, and the assembled jig matches the template and fits the Alignment Frame.

Yes, in beta. Under Bed → Hold the parts with, pick ULTIM8 mat: the MINI MAT on the Mini flatbed, the XL MAT on the Large. Instead of one jig plate, every part gets its own small 3D-printed fixture with Ø5 × 4 mm pegs that press into the mat’s holes, the peg size from WHAM BAM’s Fixture Design Guides. Made to fit the WHAM BAM ULTIM8™ JIG; Jig Generator is not made by or affiliated with Wham Bam Systems.

By default, corner pieces: the part stands on the mat and loose pieces hold all 4 corners (or 2 opposite ones), each with pegs of its own, 3 or 4 on bigger parts. Pick Around the whole part under Output → ULTIM8 fixtures for a fixture with a pocket shaped like your part; balls and form fits always get one. Download all fixtures in one STL, turned over so they print without supports, or one STL per object in a ZIP. There is no Studio template in this mode: line up your artwork in eufyMake Studio as usual.

With the default corner pieces, 7 3DBenchys, 3 credit-card-size cards (CR80) or 8 golf balls fit on the MINI MAT, and 40 Benchys, 18 cards or 53 golf balls on the XL MAT. Fixtures move hole by hole, so you can drag them anywhere on the mat; parts stay inside the printable area.

They follow WHAM BAM’s design: Ø5 mm and 4 mm long, the depth of the mat’s holes, with a 1 mm chamfer at the tip. 3D printers vary, so download the Peg fit test first: six tabs from Ø4.7 to 5.2 mm. Pick the size that presses in firmly by hand under Output → ULTIM8 fixtures → Peg fit.

It is free and needs no account. Everything runs in your browser: your STL files and the generated jigs never leave your computer.